Give up your combo, e.t and mph
05-11-2007, 01:17 PM
#31
Administrator
RACING JUNKIE
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
LOL..............THATS GOOD !!!!!.........I BET I DOLLAR ON THE TOMSTER !!..
SORRY SLOWMAN.....TOM HAS A REV LIMITER ON HIS RIDE....LOL..
BJUICE
SORRY SLOWMAN.....TOM HAS A REV LIMITER ON HIS RIDE....LOL..
BJUICE
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
05-11-2007, 01:19 PM
#32
Administrator
RACING JUNKIE
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Originally Posted by jbsjunk
Originally Posted by topsportsman1
Bring It pussy
That was unf**king called for. :lol:
BTW, sweet car. Run for slips? I wanna start from the first mph clock. :P
Now thats only a cuss word if your batting for the other team.....lol
brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
05-11-2007, 01:59 PM
#33
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Mar 2007
Location: mich
Posts: 208
bjuice, just having fun with tom. i know he's faster but it's all in fun. gimmemud i hope you don't spit a valve or you may have to pull it out of your head lol.. those headers would scare the poo out of me. i don't like anything pointed at me like that. i couldn't own something like that i would be trying to put slicks on it lol. very cool sr.
05-11-2007, 04:39 PM
#36
Administrator
RACING JUNKIE
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
here are my et's so far....
67 camaro PRO-STREET 3,000 LBS
1.39 60 FT
6.07 ET 1/8 MILE
MPH 115
500 gear
180 straight cut glide
this was on the foot brake and hard 14x32's (102 roll out) on 14 inch wheel. i now have 15 inch wheels and 17x33's (101 roll out) stiff side wall..i have a 2 step in place for tranbrake....so i hope to go in some low 90's or high 80's
-------------------------------------------------------------------------------------
63 Corvette chrome moly chassis,sheet metal fabbed rear end
weighs 2100 lbs without driver
632 aluminum donovan block, EPD sheet metal intake pair of chuck nugtteyn dominaters,ponitac 14 degree big chief heads. 1200 hp @7600 and 980 ft lbs of tq
430 pro-gear with 15 inch wheels and 16.5x33's (104) roll out soft side wall.
180 straight cut glide.
i have never run the car..i hope to have out in mid June....
i will give a hint on what it ran with a 598 iron block..200/300 hp less than what i have now and 150 lbs Heavier..
5.0's and teens with a 1.12-1.14 60 ft on good track....
i WOULD LIKE SOME OPINIONS ON WHAT YOU THINK THE VETTE WILL RUN......
opps sorry i weigh in bertween 215lbs and 220lbs
Thanks- Brian
67 camaro PRO-STREET 3,000 LBS
1.39 60 FT
6.07 ET 1/8 MILE
MPH 115
500 gear
180 straight cut glide
this was on the foot brake and hard 14x32's (102 roll out) on 14 inch wheel. i now have 15 inch wheels and 17x33's (101 roll out) stiff side wall..i have a 2 step in place for tranbrake....so i hope to go in some low 90's or high 80's
-------------------------------------------------------------------------------------
63 Corvette chrome moly chassis,sheet metal fabbed rear end
weighs 2100 lbs without driver
632 aluminum donovan block, EPD sheet metal intake pair of chuck nugtteyn dominaters,ponitac 14 degree big chief heads. 1200 hp @7600 and 980 ft lbs of tq
430 pro-gear with 15 inch wheels and 16.5x33's (104) roll out soft side wall.
180 straight cut glide.
i have never run the car..i hope to have out in mid June....
i will give a hint on what it ran with a 598 iron block..200/300 hp less than what i have now and 150 lbs Heavier..
5.0's and teens with a 1.12-1.14 60 ft on good track....
i WOULD LIKE SOME OPINIONS ON WHAT YOU THINK THE VETTE WILL RUN......
opps sorry i weigh in bertween 215lbs and 220lbs
Thanks- Brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
05-11-2007, 04:58 PM
#40
Member
CRAFTSMAN
Join Date: Mar 2006
Location: Ohio
Posts: 58
Originally Posted by topsportsman1
140 mph in the 1/8 mile and the wicks not even turned up yet :P