(( WARNING )) DYNOFLO ENGINES BAD DEALINGS
05-04-2007, 03:57 AM
#201
Senior Member
DYNO OPERATOR
Join Date: Apr 2006
Location: North Georgia "GODS COUNTRY"
Posts: 538
Originally Posted by lotsof454sss
uhhhhh Avery, I looked at it twice so reduce that by number by one, but I did tell 25 people about it in person so they would all know.....Does that still mean 8610 :?: :lol: :lol: Boy I would like to buy some "good advertising" for what this would have cost in the beginning to work with the customer in correcting the situation...This sure is a hell of a lot of "bad advertising" for a small amount it would have cost to eat a few parts out of $2 million in inventory.....Agreed anyone :?: Can I get ah 'Hell Yea"..................
...Also I would think it took alot of time out of torqueing bolts to go look up every where you have sc____ up....
05-04-2007, 06:33 AM
#202
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Jan 2003
Location: Indianapolis In
Posts: 204
05-04-2007, 06:44 AM
#203
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Jan 2003
Location: Indianapolis In
Posts: 204
I also Really LIkE this post this post so I joined & posted myself
http://www.lvfbody.com/forum/showthread.php?t=25617
http://www.lvfbody.com/forum/showthread.php?t=25617
05-04-2007, 08:54 AM
#204
Senior Member
RACING JUNKIE
Join Date: Nov 2004
Location: ILLINOIS
Posts: 2,190
BOYS AND GIRLS IT DOES NOT LOOK GOOD FOR SCOTT---THE PRESSURE IS ON IN ALOT OF PLACES- PRETTY SOON HE WILL TRY A CLASS ACTION SUIT AGAINST EVERYONE THAT HAS COMPLAINED ABOUT HIS ENGINES!!!!!!!!!!!!!!!!THAT WOULD BE A BIG SUIT :shock: :shock: :shock:
05-04-2007, 10:09 AM
#205
Senior Member
DYNO OPERATOR
Join Date: Apr 2006
Location: North Georgia "GODS COUNTRY"
Posts: 538
FOR SALE BANKRUPT ENGINE BUILDING COMPANY
If this guy thinks he can bulldog over everyone I am afraid he is in for another lesson....YOU NEED TO CUT YOUR LOSES BUB :!: He will need a whole army of lawyers and he should get some that were better at sueing than the ones that sued craigslist.com...Hell they owe craigslist a ton in lawyer fees now on top off getting their ass kicked in court...What a joke and making himself look worse all the time.... Get a judge to sign that email and then maybe you got something but til then......Anyone want to buy a engine building company at bankrupt prices :?:
05-04-2007, 12:05 PM
#206
Junior Member
SHOW GUEST
Join Date: May 2007
Posts: 1
Originally Posted by fastbowtie
Mitch Believe what you want Like I said If there is doubt call the Owner who checked them at SSRE the phone # is in a prior post .Hindsight is 20/20 If I would have known about any problems with DynoFlo Yes I would have checked them but we felt confident in their motors .So what you are saying is even though You ,I or anyone else that purchases a motor from a builder it,s our responcibility to recheck everything we paid them to do :?: Well maybe Im wrong for not checking them and putting my confidence in DynoFlo but regaurdless it should have been done rite the first time .This post wasnt brought over to the Scammer section from the General section To just complain about the Hand tight Rod Bolts from DynoFlo But also to show how I was treated over the phone and in emails by Scot Slotten just for implying that one of his motors had A loose Rod Bolt and asking what he would do about it.I will admit I did not put A torque wrench on the bottom End except to torque the oil pump bolt .If you want to think that I am in the wrong for not rechecking their work thats OK because it should have been done correctly at DynoFlo.
05-04-2007, 01:36 PM
#208
Senior Member
RACING JUNKIE
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
Originally Posted by lively
BOYS AND GIRLS IT DOES NOT LOOK GOOD FOR SCOTT---THE PRESSURE IS ON IN ALOT OF PLACES- PRETTY SOON HE WILL TRY A CLASS ACTION SUIT AGAINST EVERYONE THAT HAS COMPLAINED ABOUT HIS ENGINES!!!!!!!!!!!!!!!!THAT WOULD BE A BIG SUIT :shock: :shock: :shock:
05-04-2007, 01:37 PM
#209
Senior Member
RACING JUNKIE
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
Originally Posted by Ace437
Originally Posted by fastbowtie
Mitch Believe what you want Like I said If there is doubt call the Owner who checked them at SSRE the phone # is in a prior post .Hindsight is 20/20 If I would have known about any problems with DynoFlo Yes I would have checked them but we felt confident in their motors .So what you are saying is even though You ,I or anyone else that purchases a motor from a builder it,s our responcibility to recheck everything we paid them to do :?: Well maybe Im wrong for not checking them and putting my confidence in DynoFlo but regaurdless it should have been done rite the first time .This post wasnt brought over to the Scammer section from the General section To just complain about the Hand tight Rod Bolts from DynoFlo But also to show how I was treated over the phone and in emails by Scot Slotten just for implying that one of his motors had A loose Rod Bolt and asking what he would do about it.I will admit I did not put A torque wrench on the bottom End except to torque the oil pump bolt .If you want to think that I am in the wrong for not rechecking their work thats OK because it should have been done correctly at DynoFlo.
05-04-2007, 01:38 PM
#210
Senior Member
RACING JUNKIE
Join Date: Feb 2006
Location: Lenoir City Tennessee
Posts: 864
Originally Posted by Ace437
Originally Posted by fastbowtie
Mitch Believe what you want Like I said If there is doubt call the Owner who checked them at SSRE the phone # is in a prior post .Hindsight is 20/20 If I would have known about any problems with DynoFlo Yes I would have checked them but we felt confident in their motors .So what you are saying is even though You ,I or anyone else that purchases a motor from a builder it,s our responcibility to recheck everything we paid them to do :?: Well maybe Im wrong for not checking them and putting my confidence in DynoFlo but regaurdless it should have been done rite the first time .This post wasnt brought over to the Scammer section from the General section To just complain about the Hand tight Rod Bolts from DynoFlo But also to show how I was treated over the phone and in emails by Scot Slotten just for implying that one of his motors had A loose Rod Bolt and asking what he would do about it.I will admit I did not put A torque wrench on the bottom End except to torque the oil pump bolt .If you want to think that I am in the wrong for not rechecking their work thats OK because it should have been done correctly at DynoFlo.