BEWARE!! OF MICS1976

Thread Tools
 
Old 04-09-2008, 10:02 AM
  #71  
NorthMotorSports
Senior Member
MASTER BUILDER
 
Join Date: Oct 2006
Location: Fontana, KS
Posts: 171
Default

Originally Posted by mics1976
hollowledsleds better go back to your street racing as it appears none of your cars need to certified and you cant need a NHRA license for that dragster since you cant fit in it . we do hit BRISTOL and MAPLEGROVE and can come to your little town and run if you can get your license in time. but then again dont need one if you are only running 11's. HPP 12/03 On the cover and story inside. course we only ran 8.05 in the dallas heat. you have 5.11 dialed on your dragster and we only run 4.90 - 5.10 in the 1/8th which we dont like , but we have a DOOR SLAMMER . your probably a nice guy but as i said earlier, dont have the time or patience for tire kickers.have no idea what the joke about the jet bussiness is about, must be your attempt at being funny both cars in the stacker are certified and have a NHRA license and if you want to put one of those sleds up as a bet let me know. SORRY to read about your son as i too have lost a son. godspeed
Hey you dipshit first off where do you get the nerve to fuck over some guy that wants to be honest and just get some damn jets second its not hollowayledsleds its hollowayhotrods third why dont you get the fuck off this sight and go screw some other site over what you did is bullshit and thankgod you didnt do it to me nuff said
NorthMotorSports is offline  
Old 04-09-2008, 12:25 PM
  #72  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,523
Default MICS1976

I totally agree with NorthMotorSports, get bent.
fla1976 is offline  
Old 04-09-2008, 02:04 PM
  #73  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

Originally Posted by mics1976
todd ,dont be so hard on yourself with that 3rd grade education you have at least you get to bend tubes
If you honestly think mandrel bending tubes is easy you are a fool. I am not speaking of the crude tube benders most racers are used to seeing/ using. Those are a complete joke. :lol: I am talking about 3 axis cnc stuff that can run as many bends per tube as you want in one cycle. Some jobs we do have as many as 6- 10 bends in them( most are only 4-5) with positive and negative rotations between bends.. BENDS MUST BE HELD WITHIN 2 tenths of a degree and the finished parts have to fit a gauge with .020" over saddles(on a 3" tube the saddles measure 3.020) ...yeah it doesn't take any type of skill to do that without junking several parts in the process. :roll:

We run everything from .375 x .065 up to 7" x .120 wall
Most of our stuff is on "1 to 1 " tube dia - radius ( 3" tube x3 radius etc)
bending 6" .065 wall tubing on a 6" radius over 100 deg bends. We also do 5" .065 316 and 304 stainless on a 5" radius...

5" .071 ALUMINUM ON a 6" radius. (without ripping the tube in half because as we all know aluminum is soft)

my only point was you are acting like a little child with the name calling. Changing someones name into an insult is the type of stuff 3rd graders do. And you refered to them as
"mentally unarmed" several times. I think the thread served it's purpose. It has shown the rest of us what kind of "man" you are, and it certainly shows that you are not the type of individual most of us care to do any type of busines with. Congratulations on your magazine article and your racing success.

Have a good one.

Todd
Tod74 is offline  
Old 04-09-2008, 02:08 PM
  #74  
olds48
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Default

You know Mics1976,I didn't want to talk to you but you are real hard to not want to slap.Leave everyone alone.And as far as dead son's...you big bad nightclub owner,you are probably the one who made money selling liquor to some idiot that went out and killed your poor innocent son.His blood may be on your hands.Think about that while you growup.When you come back with a more respectful attitude you will be welcome I'm sure.Until then LEAVE. Eric
olds48 is offline  
Old 04-09-2008, 02:12 PM
  #75  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

Originally Posted by olds48
You know Mics1976,I didn't want to talk to you but you are real hard to not want to slap.Leave everyone alone.And as far as dead son's...you big bad nightclub owner,you are probably the one who made money selling liquor to some idiot that went out and killed your poor innocent son.His blood may be on your hands.Think about that while you growup.When you come back with a more respectful attitude you will be welcome I'm sure.Until then LEAVE. Eric
WELL said.
Tod74 is offline  
Old 04-09-2008, 02:50 PM
  #76  
mics1976
Junior Member
JOURNEYMAN
 
Join Date: Jun 2007
Posts: 25
Default

you all are funny..BUT LOOKS ARENT EVERYTHING. APPARENTLY SOMEONE CAN READ HELP LEDSLEDS FIND THE MAGAZINE ARTICLE DIPSHITS. THAT MOPAR COULDNT BEAT MY STREETCAR AND WE WILL SEE YOU IN BRISTOL MOPAR1968........ MY NITECLUB WAS A TOPLESS ONE AND WE DIDNT SELL IF YOU WERE INTOXICATED. ITS SO EASY TO PUSH YOU GUYS BUTTONS AS MOST ARE BRACKET RACERS ANYWAY AND RELY ON THERE DELAY BOXES..LMAO THE PROFILES ARE FUNNY THOUGH. THE TUBING BENDER, MAYBE YOU SHOULD TRY A WOMAN AS YOU HAVE ONLY BEEN A MEMBER FOR 6 MONTHS AND HAVE LEFT OVER 600 POST. BOY I SURE AM IMPRESSED THAT YOU TOOK THE TIME TO EXPLAIN YOUR WORK. DOES THAT IMPRESS THE WOMAN?? OLDS48 YOU HAVE LIQUID MUSCLES AS WE USED TO SAY. LMAO
mics1976 is offline  
Old 04-09-2008, 04:03 PM
  #77  
mics1976
Junior Member
JOURNEYMAN
 
Join Date: Jun 2007
Posts: 25
Default

its been fun guys , i never realized there were so many that knew nothing about this. for those that have 600 and 700 post in half a year. lmao but you need a woman and life. will answer when there is time as this isnt as much fun as i thought it would be. but your buttons are easy to find
mics1976 is offline  
Old 04-09-2008, 05:05 PM
  #78  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

:lol: :lol: HAAAAAAAAAAAAAAAAAAAAAA :lol: :lol:
mopar1968 is offline  
Old 04-09-2008, 06:23 PM
  #79  
slowmotion
Senior Member
RACING JUNKIE
 
Join Date: Nov 2005
Location: Staunton, IL
Posts: 943
Default

What he said.....

IN CLOSING , AMAZING THAT ANYBODY THAT DOESNT KNOW THE FACTS CAN VOICE YOUR OPINION AS THIS IS AMERICA. BUT I LIKE TO GET ALL THE FACTS BEFORE STATING AN OPINION WHICH NOBODY DID. GLAD THIS IS JUST ENTERTAINMENT BUT FROM SOME OF THE RIDES THAT HAVE STUCK THERE FOOT IN THERE MOUTH ,WOULD BE FUN TO LINE NEXT TO THEM AT THE TRACK. EXCEPT YOU MOPAR1968...LOOKS LIKE THAT CAR MUST RUN 10'S WOW. AND RUDY HOLLOWHEAD SINCE YOU HAVE NEVER BEEN ON A TRACK AND A DRUNK THINK WE CAN STAY CLEAR WHILE YOU LEARN. AND NNNOOOO I STILL NOT INTERESTED IN YOUR TRADE! LMAO

TILL NEXT TIME WHEN THERE ARE SOME MORE STUPID COMMENTS TO RESPOND TO . AND TO WHOEVER STATED TO GET RID OF THIS IDIOT......FIGURE OUT THAT THIS FORUM HAS NOTHING TO DO WITH RACEJUNK a$$ AND YOUR CORRECT THAT THE MODERATOR DOES NOTHING AS THIS IS FOR THE PEEPS TO USE FOR ENTERTAINMENT

What he meant...
Originally Posted by mics1976

IN CLOSING , AMAZING THAT ANYBODY THAT DOESNT KNOW THE FACTS CAN VOICE YOUR OPINION AS THIS IS AMERICA. BUT I LIKE TO GET IT IN THE BUTT BEFORE STATING AN OPINION WHICH NOBODY DID. GLAD THIS IS JUST ENTERTAINMENT BUT FROM SOME OF THE RIDES THAT HAVE STUCK THERE C***K IN MY MOUTH ,WOULD BE FUN TO BEND OVER FOR THEM AT THE TRACK. EXCEPT YOU MOPAR1968...LOOKS LIKE YOU MUST HAVE 10" WOW. AND RUDY HOLLOWHEAD SINCE YOU HAVE NEVER BEEN TO A GAY BAR LIKE I HAVE THINK WE CAN STAY IN TOUCH WHILE I GO BACK. AND I STILL INTERESTED IN TRANSEXUAL IF ANYBODY KNOWS ONE! LMAO

TILL NEXT TIME WHEN I COME BACK FROM THE GAY WEBSITES. AND TO WHOEVER STATED TO GET RID OF THIS IDIOT......FIGURE OUT THAT THIS FORUM HAS NOTHING TO DO WITH ME TAKING IT IN THE a$$
[/quote]
slowmotion is offline  
Old 04-09-2008, 10:49 PM
  #80  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,137
Default

[quote="mics1976"]. BOY I SURE AM IMPRESSED THAT YOU TOOK THE TIME TO EXPLAIN YOUR WORK. DOES THAT IMPRESS THE WOMAN?? quote]

YEAH...About as much as a magazine article. :lol:
Tod74 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -