(( WARNING )) DYNOFLO ENGINES BAD DEALINGS
05-18-2007, 06:11 PM
#251
Administrator
RACING JUNKIE
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,236
Originally Posted by fastbowtie
I sent Scot the email below yesterday morning and he replied back to me around 5pm .Whats funny is he says George is displeased with me
Thats funny George is My Best friend and by the time he finished reading it it had him scratchin his head .
Here is Scot,s reply
Scot Here is A hint you giving Japaniese Tourists shop tours dont count
I just had to say that before someone else did :lol:
Thats funny George is My Best friend and by the time he finished reading it it had him scratchin his head .
From: fastbowtie To: dynoflo Date: 2007-05-17 10:06:33
Subject: Scot
Re: Ad #809660
Message: Scot
I strongly suggest that you contact George Pils at southern Style Racing Engines PH# 727-546-7000
About the 454ci sbc
That you sold George Douklias & I
It appears that not only was it incorectly assembled but It,s also Not A 454ci Engine with A 4.185 bore
It,s A 441ci with A 4.125 bore .
And I really hope you dont try to claim that we switched blocks or anything else .We traced the serial # on the block that you sold us back to you and can prove that it wasnt switched .Mr Douklias & I dont plan on sueing you Though we should .
We think it,s better to inform everyone And show just how you treat your problems and the work that comes out of DynoFlo .
You have cut down & belittled me & many other people in your post,s even to the point of slander here on Racing Junk and I personally dont like it.
The way you have handled this whole ordeal borders on insanity .I have given you several chances and even the Moderator told you if you tried to settle this He would delete the intire Thread and all you did was Yell at him in caps.
This problem IS NOT going away by trying to ignore it or sending letters to Racing Junk or other web sites threatening them to remove post,s about You & DynoFlo .
Its going to take you growing some nuggets and owning up to the fact that your company can A mistake and make it rite with everyone involved or have publicly trashed on the internet because you have really shot yourself in the foot on this one .
Donn Waters 727-560-8549
Subject: Scot
Re: Ad #809660
Message: Scot
I strongly suggest that you contact George Pils at southern Style Racing Engines PH# 727-546-7000
About the 454ci sbc
That you sold George Douklias & I
It appears that not only was it incorectly assembled but It,s also Not A 454ci Engine with A 4.185 bore
It,s A 441ci with A 4.125 bore .
And I really hope you dont try to claim that we switched blocks or anything else .We traced the serial # on the block that you sold us back to you and can prove that it wasnt switched .Mr Douklias & I dont plan on sueing you Though we should .
We think it,s better to inform everyone And show just how you treat your problems and the work that comes out of DynoFlo .
You have cut down & belittled me & many other people in your post,s even to the point of slander here on Racing Junk and I personally dont like it.
The way you have handled this whole ordeal borders on insanity .I have given you several chances and even the Moderator told you if you tried to settle this He would delete the intire Thread and all you did was Yell at him in caps.
This problem IS NOT going away by trying to ignore it or sending letters to Racing Junk or other web sites threatening them to remove post,s about You & DynoFlo .
Its going to take you growing some nuggets and owning up to the fact that your company can A mistake and make it rite with everyone involved or have publicly trashed on the internet because you have really shot yourself in the foot on this one .
Donn Waters 727-560-8549
From: dynoflo To: fastbowtie Date: 2007-05-17 17:00:03
Subject: Re: Scot
Re: Ad #809660
Message: George Duklias and I already spoke together about you, and boy is he not pleased with you. I have someone else handling the internet issues, and they will get it fixed. I am no longer going to involve myself in these issues, since, of course, these issues are completely out there and not worthy of a response. George is regretting not having me fix the engine [remember that? that is called stepping up.], though he does feel that George Pils is a good guy. My customers know how to read through the stories on the internet, and actually sales are up as a result, they call to have me explain it, then they laugh about you or Jay and then they buy from me. The truth is a powerful tool. Someday you may get to the point to understand, how you and your buddies discredit yourselves to my benefit. I have given more shop tours in the last few weeks than in a long time. Once you get the tour,see the parts, see the equipment, see the people, see the shop you are going to buy. Just that simple.
Subject: Re: Scot
Re: Ad #809660
Message: George Duklias and I already spoke together about you, and boy is he not pleased with you. I have someone else handling the internet issues, and they will get it fixed. I am no longer going to involve myself in these issues, since, of course, these issues are completely out there and not worthy of a response. George is regretting not having me fix the engine [remember that? that is called stepping up.], though he does feel that George Pils is a good guy. My customers know how to read through the stories on the internet, and actually sales are up as a result, they call to have me explain it, then they laugh about you or Jay and then they buy from me. The truth is a powerful tool. Someday you may get to the point to understand, how you and your buddies discredit yourselves to my benefit. I have given more shop tours in the last few weeks than in a long time. Once you get the tour,see the parts, see the equipment, see the people, see the shop you are going to buy. Just that simple.
I just had to say that before someone else did :lol:
WAIT A MINUTE...this SCOT guy is dumber than i thought...i CANNOT believe he would even try to make the CLAIM THAT THIS EPISODE HAS INCREASED HIS BUSINESS...
ohhh HOW DOES THIS SOUND !!!!
i read an article that has been reviewed over 18,000 times on how you really screwed up a dudes motor...so WE JUST THOUGHT WE WOULD SPEND AN EXTRA $10,000 WITH YOU IF YOU WILL TAKE US ON A SHOP TOUR !!!!!!!! LMAO...
Come on man...thats some funny Shit right there Now....!!!!!!!!!!!!!!!!!!
Brian...i am still laughing..
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
05-18-2007, 06:26 PM
#252
Senior Member
DYNO OPERATOR
Join Date: Apr 2006
Location: North Georgia "GODS COUNTRY"
Posts: 538
YOU HAVE GOT TO BE KIDDING
Well I pulled a satellite view of "this shop" and if tours are being taken they don't last 5 minutes and that includes coffee with the guys and time to inspect the torque wrench that made him famous..I heard it is now placed in a glass case and looks like the day it was bought new and is also known as "THE WRENCH YOU CAN SC*EW YOURSELF WITH" made in China...Boosted the shop tours HAHAHAHAHAHA who the hell you think your convincing? This is not a bunch of school kids, it WAS your customer base.
05-18-2007, 08:01 PM
#253
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Jan 2003
Location: Indianapolis In
Posts: 204
In responce to built_to_race
The $185 was for installing & degreeing the camshaft and installing the timing chain cover .
The rest of the additional money was for the Camshaft Oil pan Oilpump Pickup and Front Cover.
Not only are they having problems with torquing because they have TWO people to do it and then ask the customer to recheck their work .
They must be having trouble telling the difference between a A Boring Bar and A Finish Hone . :roll:
Scot Where did the 13 cubic inches go :?: :?:
The $185 was for installing & degreeing the camshaft and installing the timing chain cover .
The rest of the additional money was for the Camshaft Oil pan Oilpump Pickup and Front Cover.
Not only are they having problems with torquing because they have TWO people to do it and then ask the customer to recheck their work .
They must be having trouble telling the difference between a A Boring Bar and A Finish Hone . :roll:
Scot Where did the 13 cubic inches go :?: :?:
05-18-2007, 08:16 PM
#254
Senior Member
RACING JUNKIE
Join Date: Sep 2005
Location: ID
Posts: 1,122
Once again, scot steps up to the plate and strikes out big time, but if you ask him he will tell you he hit a home run...lmao
scot seems to suffer from delusions and believes his own lies.
again my opinions, but I think I am a pretty good judge of people.
scot seems to suffer from delusions and believes his own lies.
again my opinions, but I think I am a pretty good judge of people.
05-19-2007, 04:10 AM
#256
Senior Member
MASTER BUILDER
Join Date: Oct 2006
Location: Georgia
Posts: 140
Originally Posted by slowman
just my .02 but why would a guy send letters to remove all the bad post on every web site when biz is up because of them. :roll: i'm just a little confused on this.
05-19-2007, 10:54 PM
#258
Junior Member
SHOW GUEST
Join Date: Mar 2006
Location: Goshen, IN
Posts: 1
scott @ dynoflo
Scott, you couldn't give me one of your engines after reading this. and as what your saying about Donn (fastbowtie). Ive meet the man and have had dealings with him many times and he knows what he's saying and doing[/list][/quote]
05-21-2007, 12:25 PM
#259
Junior Member
SHOW GUEST
Join Date: Sep 2006
Posts: 9
I have read through this whole thread and was worried about my short block I bought from DynoFlo. I bought a 434 from Scott back in Jan 07. I just got done with the rest of the assembly a few weeks ago and dynoed it this past weekend @ Bob Wirth R&D in hayward Ca. I am very pleased with my motor. It made 602hp @ 6300rpm, and 559lbs @ 5000rpm. All the valvetrain and heads came from my 406. I am pleased with Scott's work. I picked the motor up from Scott when we picked up my freinds 582ci that made 959hp. We watched Scott dyno it. I am very happy with DynoFlo's work!
05-21-2007, 01:16 PM
#260
Senior Member
DYNO OPERATOR
Join Date: Apr 2006
Location: North Georgia "GODS COUNTRY"
Posts: 538
Congratulations Dragginby
We are all glad you got what you paid for, but let me say this also....If this thread had not been going you may right now be singing a different song...This man has got to get his act together or he will bankrupt himself...Think about it for a moment...You could be one of the ones that was not satisfied just as easily as the LIST of other people that were not as lucky as you were this time.....If he can get his act together great for him but the damage he has created for himself is not going away, people will not forget, so damage control is his game now to survive.....oh yea, and before you got your engine, if you were aware of this thread, I bet you could not have rammed a bb up your ass....
We are all glad you got what you paid for, but let me say this also....If this thread had not been going you may right now be singing a different song...This man has got to get his act together or he will bankrupt himself...Think about it for a moment...You could be one of the ones that was not satisfied just as easily as the LIST of other people that were not as lucky as you were this time.....If he can get his act together great for him but the damage he has created for himself is not going away, people will not forget, so damage control is his game now to survive.....oh yea, and before you got your engine, if you were aware of this thread, I bet you could not have rammed a bb up your ass....