Originally Posted by TS1955
As far as the carb goes I would probably go with a Holley 1050. But my concern on this combo is that it looks like it has a little too much cam for a 10.5 compression motor. With a cam that big, your dynamic or running compression is going to be from 7.5 to about 8 to 1. This depends on when your intake valve closes. JMO
TS1955
i know the cam is to big at the time thats the only cam i had, on the carb should i use a 2 or 3 circuit, and the holley is better than the quick fuel, what size cam would be good, thanks