Originally Posted by johnracer
I've built a number of 406's and 383's with h-beam 6" rods and roller cams and have always used standard base circle. The only problem I've experienced was the first 406 I built. It had stock 5.7 rods and a small solid cam. I had to grind the cam side rod bolt heads to gain the necessary clearance. I'm pretty sure that most h-beam rods are profiled to gain the necessary clearance. You'll need to check it just in case.....
I had the same problem with my first one back in 84. Now I just get the smaller base circle as a precaution. A little more clearance in this area can't hurt!