Originally Posted by shawnp
Originally Posted by badluv
:?: To all the professionals on here and the ones that know.What should it run?And what would you change and why?
565 bbc
13.5 to 1
345 afr heads no porting
744 704 lift
282 284 dur @ 050
110
1050 dom.
victor R cnc'ed by reher morrison
1.76 glide
4800 converter 10"
514 gear
33 tall tire
3000 lbs
The compression is a little low. The cam... I just pulled a 761 744 that was 283-289 out of my 548. The carb will work. The heads unported are on the edge. I do hope that is a good gear set in that glide. Why such a small stall? You are looing at 6.20's. You are going to be 114-117 mph.
I run 6.20's with less compression and junk 074 heads with a 540