finally
 

My car got jealous of my wife's car. We put ladder bars and coil overs on her's over the winter. 41 years of abuse on the stock leafs on my car finally took a toll. Got my ladder bars and coil overs in on saturday. Worked most of the weekend getting everything squared up. Should have it done this coming weekend. We have a race next weekend. Man, I'm getting to lod to be doing this stuff, LOL.

Your never to lod to do this. We need pics though. :lol: :lol: :lol:

Curtis

:lol: I'm too lod ! Way too lod. :lol:

Post pictures.
You are not alone. I'm too old and tired.......Dave

ladder bars and coil overs are lod school.

lodes but goodes..........

I'll try to get some. Gotta race next week and going to be busy on it to get it going. Wife said she won't go racing without me.

One of the other reasons is the car sat to low. Dragged the headers on pebbles. Needed someone to lift the front of the car if I ever needed to put a jack under it. Had to use 2 2x12's just to get it out of the trailer.


You can check hers out that we did over the winter at www.cambirdracing.com Go to the photo album section

Here are a few I took last night. Quality isn't the best, but you asked for them, haha.

http://www.cambirdracing.com/photo_a...6053/1/138207/

Only about half way done with it.

Looks like it is coming around. I think I know why it is taking so long, your chassis guy is asleep :shock: :shock: . Good luck.

Curtis

HAHAHAHA, man, I get up at 4:30 to go to work, work 10 hours and try to get to bed by 9. That and a 2 1/2 hour round trip drive everyday. doesn't give me much time to do anything. I need to have it done by next weeeknd. And I still need to change the front springs.

Looks like your creeper is toooo comfortable! LOL!

TS1955

that's my wifes creeper. The wheels fell off of mine.

Got the shocks mounted last night and the track locator also. Will have more pic's at the end of the weekend. Still need to chaange the front springs. Running out of time, only have one week to finish it.

Hope everything goes well. Good Luck!

TS1955

thanks. I needed to do about 2" of welding last night, as soon as I struck an arc, I ran out of wire. Home Depot is only 4 miles away, but the traffic, it took 35 minutes for a round trip. And I was only at the store for 5 of those.

got it on the gound last night. Should have some more pic's up later today on our web site.

Went straight the first pass. Took a couple of more runs to get the shocks dialed in. Probably need more runs to fine tune it.

Now it's time to adjust the front end. car would come up on the stops and not settle back down. I would actually bounce the front tires off the ground a couple of times. Gonna try to shorten the stops and adjust the shocks and see what happens.

AND not nap first round,haha.