nye's automotive
 

Has anyone had a motor built by these guys and was not happy with it? I'm thinking about getting a motor built and was looking at dynoflo and ohio crankshaft also. Can anybody help me pick the right one to go with? Thanks

Nye's out of the three..

where do you live ?..if you were considering going some distance for your motor i like PAR Racing Engines out of S.C. ( Scott Duggins is the onwer)..864-578-5622...His 565's with oval port heads are makng right at the 1050hp range..and they running these things round,after round after round..with no problems and minimum maintenance other than the preventive norm....

just my 2 cents.

Reher Morrison.

I live in Louisiana, I'm looking to build a big chief motor, I already have a square port tunnel ram with two 1150's. The intake is for 18 degree heads so I plan on going with brodix pb1802 with titanium intake valves and the intake is already drilled for a fogger system. This will be in a drag radial car weighing about 3400 lbs.

I have a Nye's 582 in my car and know Pat (one of the owners) personally he is a heck of a nice guy and wont do you wrong ! DO NOT buy from Dynoflo. Nyes stuff works good and prices are great ! Machine work is top notch !

Read this thread and you won't even think about dyno-blow

http://forums.racingjunk.com/viewtop...hlight=dynoflo

Thanks, I spoke with Pat the other day but just wanted to hear what everyone had to say. He seemed to be a honest and helpful guy but it never hurts to be safe. I guess he will be the one doing my motor. Thanks for all the input.

ReherMorrison....

reher morrison told me they won't make anything larger than 620 inches

:shock:

Gene Fulton or Sonny Leonard for big inch power.

Sonny,King of the Mountain Motors :D He's about 30 minutes from me,I'll be able to afford his work in about 30 years.Hard to believe that RM won't go over 620?????

Who did you talk to at R.M.?? I don't understand because they list a AA 747 on their homepage.. :shock:

I don't remember his name, he just said they would not build me a 632 when I could buy a 620 inch motor. He just seemed like he may have been having a bad day. I believe that I will let Nye's Automotive build it. They seem to do extremely nice work and Pat was very helpful when I talked to him on Friday.

If you are wanting a crate type of performance engine that Reher Morrison 622 is hard to do better.

Reher Morrison will not build anything above a 622 cu in engine with a cast iron block in their Super Engine Series. Years ago Reher Morrison did offer a 632 cu in engine just like everyone else did. By decreasing the stroke some and increasing the bore some thay came up with their 622 which blew away their 632. That is why they will no longer sell them. As many 632's as there is and as I have built, I am convinced the 622 is far better. Check the performance on the Reher 622 before you close the door on it. REher will build up to a 880 cu in if you have deep pockets.

There are several good engine builders in Louisianna and a whole ton of good Custom Engine Builders in Texas of which I try to be one of. There are also other crate builders other than Reher Morrison. Sunset Racing Engines is another one.

It all depends on your budget, time limits, and what you want.

Ed

Pat is a great guy. Rhere Morrison are also really good at what they do.
Another really good builder is PAR Scott Duggins.
Steve Schmidt is also a very good builder.

Call Raymond Kittler in Shreveport... He builds all our mud racing motors... Proven winners and the stay together... And trust me they go through hell..

I've heard good things about Diamond Racing in Hammon LA. Call and ask to talk to Don 985-345-9347

Ohio crankshaft is building our new short block and I have no complaints on their service and honesty. There is a write up on them in this weeks or last weeks national dragster. You might give them a shot.

Rick