1967 CAMARO SS/RS - $42,900 - $42,900
NEW PRICE $42,900
Updates From Seller
GM 454 2 bolt block bored .30 over
New Merlin Grumpy Jenkins type cast iron heads.
Square port, 310 cc., 119 cc. open combustion chamber, 2.19
intake/1.88 exhaust stainless valves w/titanium
ARP head bolts,
Competition Cams Hyd roller cam - Com 11-444-8,
Lift .560 intake/.580 exhaust, Duration .300 Intake/.306
Comp Cams hyd roller lifters
Comp Cams valve springs
Comp Cams Pro Magnum rockers
Comp Cams push rods
Weiand Team G square port matched intake
JE forged small dome pistons 10.1 / 4.28 bore
with Sealed Power rings
Eagle SIR I beam rods 6.135
Moroso oil pan and pump
ATI Super Dampner
Holley mech. fuel pump
Edelbrock aluminum water pump
Pro Systems 950HP carb / 4150 style. I had this
built from Pro Systems for this motor.
MSD billet distributor, wires, 6AL Ign. box,
Hooker Competition headers/ ceramic
I have the dyno sheet when the motor was built
and it is on the motor only.
RAM steel flywheel
SPEC clutch & pressure
Wilwood front and rear disc brakes
All new stainless brake lines, master cylinder,
QA-1 front and rear shocks
The 12 bolt rear end was ordered complete brand
new from Moser Engineering
Complete new wiring kit
Every part on this car was replaced with brand
new parts and I have most all receipts.
I don't have any restoration pictures during
the process due to I didn't have it done.
It was restored in 2005-2006 and has been driven
very little since then. I have piles of receipts from the
owner that had the work done.
I do know that the floor pans had some rust and
they replaced the floor pans and the quarter panel have been
There is absolutely no sign of any place that has
ever had any rust. I do know that he spent almost $20,000.00
on the body & paint.
I have owned a collision repair shop for 36 years
and we have built and restored a lot of these cars, and this
is one of the nicest jobs that I've seen
Let me know if you need to know anything else
about the car or would like me to take any more
Call me if you would like to talk about
Thanks, David Chambers Above Added: Tue May 7, 2019, 7:01 am PST
PRICE HAS BEEN DROPPED TO $47500.
WILL TRADE UP OR DOWN FOR FULL TUBE CHASSIS CAR WITH TITLE. Above Added: Mon February 4, 2019, 8:36 pm PST
454 .30 OVER PUMP GAS, ROLLER CAM, PRO SYSTEMS CARB, ALL THE BEST PARTS,DYNOED AT 505 HP.
BORG WARNER SUPER T10 4 SPEED, ALL NEW INTERNALS, NEW FLYWHEEL,CLUTCH, PRESSURE PLATE, LAKEWOOD SCATTER SHIELD.
12 BOLT POSI., BRAND NEW COMPLETE REAR END FROM MOSER, 3:73
ALL NEW 4 WHEEL DISC BRAKES AND ALL BRAKE LINES, & BOOSTER/MASTER CYL.
BODY HAS BEEN COMPLETELY ROTISSERIE RESTORED. SUPER SLICK PAINT AND BODY.
THE UNDERSIDE AND TRUNK AREA ARE ALL COATED WITH SLICK BEDLINER COATING.
EVERY NUT, BOLT,FASTENER,BUMPERS, GLASS,LIGHTS,RS COMPLETE GRILLE ASSY.,& BODY PANELS HAVE BEEN REPLACED, 4" COWL HOOD.
YOU WON'T FIND VERY MANY NICER THAN THIS.
INTERIOR HAS COMPLETE NEW PACKAGE.SEATS,CARPET HEADLINER,DASH,DOOR PANELS,PACKAGE TRAY.
FRONT & REAR SUSPENSION IS ALL BRAND NEW
FUEL SYSTEM HAS ALL NEW LINES, MECH PUMP,FUEL TANK W/SUMP.
CUSTOM 3" COATED EXHAUST, HOOKER COMP. COATED HEADERS.
NEW BILLET SPECIALTIES WHEELS,NEW TIRES W/ ET DRAG RADIALS ON REAR.
About The Seller
Member Since June 2009
LEES SUMMIT, MO 64081
Last 12 months: 0 Learn More